At the request of forum members of TZ-UK , I've had some of the "Bond" straps made with a 2mm orange stripe in centre black stripe. Same quality and specification as the other "Bond" straps with heat welded seams and bead blasted stainless steel hardware.
Superior 1.2mm thick woven nylon ribbon with bead blasted solid stainless steel fittings. All joints are securely heat-welded and tested. All holes and strap ends are heat sealed. The MoD specification calls for heat welding: straps which are merely stitched do not meet the specification.
All the hardware is bead-blasted solid stainless steel.
The holes in these straps are perfectly burnt and sealed with no melted nylon "scabs". There are 17 holes, starting 25mm from the end of the strap and spaced every 7mm. This means that the straps will fit all wrists from 5.5 to 10 inches.
Every strap has an overall length of 280mm, excluding buckle*. The specification calls for a 60mm spacing between the second and third rings (where the watch head fits) which is often inadequate to prevent the rings fouling the lugs on many of today's watches. The spacing on these straps has been increased to 75mm to accommodate larger watch heads. Standard G10 style and also RAF style (without the extra piece and third ring).
Now also available in de-luxe quality.
Please be aware that nylon can stretch and also shrink so all measurements are +/- 5mm for length and +/- 1mm for width.
Superior 1.2mm thick woven nylon ribbon with bead blasted solid stainless steel fittings. All joints are securely heat-welded and tested. All holes and strap ends are heat sealed. The MoD specification calls for heat welding: straps which are merely stitched do not meet the specification.
All the hardware is bead-blasted solid stainless steel.
The holes in these straps are perfectly burnt and sealed with no melted nylon "scabs". There are 17 holes, starting 25mm from the end of the strap and spaced every 7mm. This means that the straps will fit all wrists from 5.5 to 10 inches.
Every strap has an overall length of 280mm, excluding buckle*. The specification calls for a 60mm spacing between the second and third rings (where the watch head fits) which is often inadequate to prevent the rings fouling the lugs on many of today's watches. The spacing on these straps has been increased to 75mm to accommodate larger watch heads. Standard G10 style and also RAF style (without the extra piece and third ring).
Now also available in de-luxe quality.
Please be aware that nylon can stretch and also shrink so all measurements are +/- 5mm for length and +/- 1mm for width.