View Basket
 
Mailing List | Home
Timefactors
 

Rubber Straps

Time Factors Stainless Steel Fishtail Buckle 22mm

I'm regularly asked for buckles for my straps so I've decided to test the water with this one.

It's been created using the same mould that was used for the bronze buckle on the PRS-30 and will fit straps which are 22mm at the buckle end. The straps should have the larger holes to take a 4mm flat tang. Many customers who ordered the PRS-30 have asked for a shorter strap, which is now on order: this buckle will fit those straps.

32mm at the widest point, 24mm back to front and 22mm screwed bar fitting.

Gallery

 

 
Product ref: Time Factors Stainless Steel Fishtail Buckle 22mm- £10.00
In Stock


Select:  Quantity:


Time Factors Dreadnought, Precista and Waffle Silicone Straps

These straps ar supplied with current Time Factors watches and I have had many requests to make them generally available.

Two of the straps are the same style but different sizes:

  • Dreadnought strap = 22mm lug fitting with "Dreadnought" signed buckle
  • Precista strap = 20mm fitting with the "Precista" ambigram signed buckle

The third strap is the "waffle" strap supplied with the Smiths PRS-68 diver with the Smiths "S" on the buckle.

Gallery

 
Product ref: Time Factors signed silicone straps - £18.00
In Stock


Select:  Quantity:


Silicone Rubber Black, Blue & Orange - 22 & 24MM

Specification

  • Silicone rubber construction
  • Made in Italy
  • 5.3mm thick at the lugs and 3.3mm at the end
  • Buckle side is 75mm long and the "hole" side is 115mm
  • Available in 22 & 24mm, black, blue & orange
  • Fitted with a 22mm brushed stainless steel buckle on the 24mm strap and 20mm on the 22mm

The hole in the strap at the "lug end" will accept a Panerai screwed bar.

Gallery

 
Product ref: Silicone 22 & 24mm- £8.00
In Stock


Select:  Quantity:


Time Factors Retro Strap in Polyurethane

If ever a style of rubber strap was sought after more than this one, let me know which it is and I'll make it.

timefactors watches

Specification

  • Soft and flexible polyurethane construction
  • 7mm thick at the lugs, tapering to 3.5mm thick at each end
  • Buckle side is 80mm long (excluding buckle) and the "hole" side is 130mm
  • Available in 20 & 22mm black only. 20mm is parallel and 22mm tapers to 20mm at buckle
  • Brushed stainless steel buckle with 7mm wide tang
  • Wet suit extension piece is available which fits both 20 & 22mm strap (see pictures 3 & 4 below)

Each strap is fitted with stainless steel tubes where the springbar passes through to prevent tearing at the edge of the strap. If the gap between the springbar holes in the lugs and the watch case is short, the tubes should not be used to allow greater flexibility when fitting the strap. Tubes are not supplied with the "flat" version.

IMPORTANT: The tubes should not be used when fitting the strap to a watch which does NOT have drilled lugs. You will have to cut the springbar and tube to remove the strap if you do. Not suitable for watches with short or hooded lugs.

This strap is now available with a flat end at the lugs and will fit watches with short lugs. To order this, please select "flat" version: the flat version does not have tubes.

Gallery

 
Product ref: Time Factors Polyurethane Retro Strap - £15.00
In Stock


Select:  Quantity:


Silicone Rubber 20mm Striped - Assorted Colours

Good quality and thick construction, these straps are available in red, blue and black and fitted with a fliplock safety deployant clasp.

Approximately 190mm long with the clasp closed, strap is sized by cutting off excess.

Gallery

 
Product ref:  8105 Silicone Rubber Striped - £9
In Stock


Select:  Quantity:

 


Silicone Rubber Tyre Tread Pattern 20mm

Another new strap from a new supplier in the ever-popular "tyre tread" pattern.

Approximately 190mm long with the clasp closed, strap is sized by cutting off excess.

20mm black only.

Gallery

Product ref:  8100 Silicone "Tyre Tread" 20mm - £9
Out of stock


Silicone Rubber 2-Piece "Chunky" 20mm

Thicker than average yet still soft and flexible.

Soft silicone rubber with polished stainless steel buckle.

The buckle side is 85mm long and the "hole" side is 125mm, approximately 25mm from the tip to the first hole.

20mm black only.

Gallery

 
Product ref:  8110 Silicone 2-Piece "Chunky" - £6
In Stock


Select:  Quantity:



20 & 22mm Rubber on Deployant clasp

The strap is made of a quality soft rubber with a plain outer and diamond patterned inner section. The deployant clasp is satin finished stainless steel with twin spring push release catches and a security fliplock clasp. The strap as supplied will fit up to a 10 inch wrist, allowing it to be worn over a wetsuit and can be altered (by cutting to size) down to 6 inches.

Soft black rubber with stainless steel deployant clasp, supplied complete with a pair of springbars.

Total length with clasp closed is approximately 190mm.

Gallery

 
Product ref:  8025  20 & 22mm:  £9.00
Out of stock

 

ISO


New | Precista | Smiths | Speedbird | Sewills | Dreadnought | Ltd Editions | TF Straps | NATO | Rubber Straps | Darlena | Misc | Co Info | Ordering| Policies | Links

All site contents Copyright © Timefactors 1996-2013

Watch Top 100's by Connectingwatches.com Home Smiths Watches Precista Watches Sewills Watches Speedbird Watches Timefactors Dreadnought